Rotary, flail and other mowers for Grounds Management

RDM Roller Mower advert image shown if present
Image shown for entry if relevant and present

A make of tractor operated, 3-bladed rotary mower, with front and rear rollers. It has a working width of 1.8m; it is manufactured by Redexim-Charterhouse.

Recycler advert image shown if present
Image shown for entry if relevant and present

A pedestrian operated, self-propelled, rotary lawn mower with 7 models, being manufactured by Toro. • 46cm cutting width x 1 model: Height of cut range: 25-75mm; weight 29kg. • 55cm cutting width x 6 models, with slightly different specifications and with a height of cut range: 25-102 or 105mm and weighing from 34 - 41kg depending on the model.

RM Range advert image shown if present
Image shown for entry if relevant and present

A wide range of rotary mowers for the domestic and professional markets which have been produced by Stihl.

RM34 advert image shown if present
Image shown for entry if relevant and present

A pedestrian twin-bladed rotary mower, with a rear roller, being designed especially for stadium situations, being part of the Sports & Professional Range of mowers. The cutting width is 860mm, with the height of cut ranging from 15mm to 75mm. The weight of the mower is 122kg. There is an optional brush attachment, with a choice of soft, medium or hard bristles. It is manufactured by Allett.

RMX Series advert image shown if present
Image shown for entry if relevant and present

A range of tractor, single rigid-deck mounted and tri-deck trailed, rotary mower units that are manufactured by Wessex International The single deck is available as rear mounted with either a front and rear roller, or as a combination mower with a rear roller and open front with two-castoring (free swivelling) wheels to reduce disturbing the sward surface during turning. The single decks can also be front mounted with rear roller and two-castoring wheels at the front of the deck. The trailed mowers are tri-deck with front and rear rollers. All the models in this series have a height of cut ran

Continue reading about this

Rotomatic advert image shown if present
Image shown for entry if relevant and present

A pedestrian operated, self-propelled, rotary mower with a cutting width of 51cm, that was manufactured by Dennis in the early 1970s.

Rotorider advert image shown if present
Image shown for entry if relevant and present

A ride on rotary mower that was manufactured by Dennis in the early 1970s.

S46Floris advert image shown if present
Image shown for entry if relevant and present

A remote controlled reciprocating knife (sickle bar) mower deck manufactured by Raymo. It is battery powered with a 46inch (117cm) cutting width and is suitable for meadows and other areas with very long grass.

SF Range advert image shown if present
Image shown for entry if relevant and present

A make of ride-on front deck rotary mower unit, with 2 models: SF224 (22 hp; 1.37m cutting deck) and SF235 (32.5 hp; 1.525m cutting deck). Heights of cut are 25-120mm. These have a tippable 950 litre collection unit mounted behind the driver. These are manufactured by Iseki.

Snake S2 advert image shown if present
Image shown for entry if relevant and present

A make of tractor operated rotary mower, with 2 models: 320 and 400, manufactured by Trimax. • Striker 320: cutting width of 3.23m, 9 blade spindles, weighing 1280kg, requiring a tractor with a minimum PTO output of 35hp, height of cut range being 10mm-100mm, cutting 7 acres (2.83 ha) at 6mph (9.7 km/hr); • Striker 400: cutting width of 3.99m, 11 blade spindles, weighing 1580kg, requiring a tractor with a minimum PTO output of 40hp, height of cut range being 10mm-100mm, cutting 9 acres (3.64 ha) at 6mph (9.7 km/hr).